Reply to thread

Message: <blockquote data-quote="spencer321" data-source="post: 6300210" data-attributes="member: 599233">you spent the time and money to research buying an hdc3 and an aq2200 but you wanna run a prefab box. go to home depot or lowes, buy a 3/4" sheet of mdf, about 28$ if i remember correctly... they have a panel saw, if you figure out your dimensions before you go they will cut it out for you!!you don't need a fancy table saw or anything, you need a jig saw to cut the hole (router makes life a little easier but i've done it with both) and either claps... or a power drill and a helping hand... not really rocket science, you can do it.and then finish it how you want, paint it, carpet it, whatever, im sure you know how to use a can of paint, and if you really want carpet either get brave and figure it out yourself (we all started somewhere) or take it to a shop, they should be able to carpet your box for next to nothing</blockquote>

Top