Reply to thread

Message: <blockquote data-quote="azimuth" data-source="post: 4716699" data-attributes="member: 566682">oh. i had red led's in my box. i used a dremel to cut a little trench out of the corners, into the wood where it meets the glass. it wasn't shining through the edge of the glass, but modify that plan a little, and you may come up with something. personally, i would use a dremel and cut out where i wanted my lights and i would make a path in the wood where the wires would run. cover it with spackling or silicone, sand, and paint over.edit: i would run the wires inside the bracing of my box and avoid carving in to the mdf as much as possible.</blockquote>

Top