Reply to thread

Message

<blockquote data-quote="TheVanMan" data-source="post: 301902" data-attributes="member: 546085">Ok, I decided to scrap the plan for 2 15 SE and decided to go with a 15 XXX (since they cost the same anyway). Here is my box. Tell me what you think. I would try for 5 cubes but there are these stupid floor rails for by back seat to move on so it&#039;s can be bigger then 34.5&quot; wide.Here it is:H = Height (external, in inches) = 18&quot;W = Width (external, in inches) = 34.5&quot;D = Depth (external, in inches) = 17.75&quot;T = Thickness of material used (Most common = 0.75&quot; MDF)Hv = Height of the port (in inches) = 16.5&quot;Wv = Width of the port (in inches) = 2.75&quot;Ap = Area of Port (in square inches) = 45.375in^2De = Effective diameter (in centimeters) = 19.306cmLv = Length of the port (in inches) = 26&quot;Vg = Gross volume (in cubic feet) = 5.120ft^3Vb = Net volume (in liters) = 4.07ft^3Vd = Port displacement (in cubic feet) = 0.8439ft^2Dd = Driver displacement (in cubic feet) = 0.21ft^2Bd = Brace displacement (in cubic feet) = (have decided yet)Fb = Tuning frequency (in Hz) = 31.29hz</blockquote>

[QUOTE="TheVanMan, post: 301902, member: 546085"] Ok, I decided to scrap the plan for 2 15 SE and decided to go with a 15 XXX (since they cost the same anyway). Here is my box. Tell me what you think. I would try for 5 cubes but there are these stupid floor rails for by back seat to move on so it's can be bigger then 34.5" wide. Here it is: H = Height (external, in inches) = 18" W = Width (external, in inches) = 34.5" D = Depth (external, in inches) = 17.75" T = Thickness of material used (Most common = 0.75" MDF) Hv = Height of the port (in inches) = 16.5" Wv = Width of the port (in inches) = 2.75" Ap = Area of Port (in square inches) = 45.375in^2 De = Effective diameter (in centimeters) = 19.306cm Lv = Length of the port (in inches) = 26" Vg = Gross volume (in cubic feet) = 5.120ft^3 Vb = Net volume (in liters) = 4.07ft^3 Vd = Port displacement (in cubic feet) = 0.8439ft^2 Dd = Driver displacement (in cubic feet) = 0.21ft^2 Bd = Brace displacement (in cubic feet) = (have decided yet) Fb = Tuning frequency (in Hz) = 31.29hz [/QUOTE]

Verification