Reply to thread

Message

<blockquote data-quote="MrBananaMan" data-source="post: 6299903" data-attributes="member: 612052">My subwoofers and amp work fine together, until I was experimenting one day. The amp is mono, and I have two subs. They are wired with a positive and negative from each sub in their correct channels on the amp (2 positive wires in one channel, each leading to a different sub, and same for the negative side). The polarity and ohms is correct also. The weird thing is that if I unhook sub A, the amp goes into protect mode, turns back on, and goes straight into protect mode over and over again. When I unhook sub B instead, sub A and the amp work fine. And yeah, they work fine when they are both plugged in too.What the heck is going on here?second picture is how I am wired: <a href="http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&amp;amp;I=22" target="_blank">http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&amp;amp;I=22</a></blockquote>

[QUOTE="MrBananaMan, post: 6299903, member: 612052"] My subwoofers and amp work fine together, until I was experimenting one day. The amp is mono, and I have two subs. They are wired with a positive and negative from each sub in their correct channels on the amp (2 positive wires in one channel, each leading to a different sub, and same for the negative side). The polarity and ohms is correct also. The weird thing is that if I unhook sub A, the amp goes into protect mode, turns back on, and goes straight into protect mode over and over again. When I unhook sub B instead, sub A and the amp work fine. And yeah, they work fine when they are both plugged in too. What the heck is going on here? second picture is how I am wired: [URL="http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22"]http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22[/URL] [/QUOTE]

Verification