Reply to thread

Message: <blockquote data-quote="raptor727" data-source="post: 7747699" data-attributes="member: 641393"><p>Another way for subs is to take ddm digital volt meter and test the resistance on the subwoofer coils if it shows nithing on one of the coils it means its bad if it shows 4ohm and its a 4ohm coild obviously its good and the readings can vary by as much as .3 hope this helps as far as amp hook it up not hard to do run a power wire 12v fuse it with reccomended size fuse run a ground wire no longer than 3 feet to some point on the frame. Now here is the difficult part for most beginners the remote wire aftermarket cd players have these usually the blue wire it sends a signal for the amplifier to turn on when the cd player or ignition turns on run that to the remote input on the amp and there ya go. Hope this helps</p></blockquote><p></p>

Top