Reply to thread

Message

<blockquote data-quote="basscort2009" data-source="post: 7360690" data-attributes="member: 609695">ok so i have these door pods with these speakers (see pic below)the tweeters are ran together in parallel to 4 ohms.the mids are ran together at 2 ohms.amp is a crossfire bmf 600.2 so i just have mids on one channel and the tweets on another channel.i have all speakers running active to the amp.MY QUESTION is what xover do i use to cross the tweets because the amp only has 1 xover freq knob so i just have it at its highest (250 htz) and then cross the tweets on the HU at 4khtz.i want to turn the xover on the amp down so i can let my mids do more work on the bass side but im scared if i turn it down it will blow the tweeters being set too low.PLEASE give me some insight<img src="http://i65.photobucket.com/albums/h236/basketball3rulz/IMAG0461.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="basscort2009, post: 7360690, member: 609695"] ok so i have these door pods with these speakers (see pic below) the tweeters are ran together in parallel to 4 ohms. the mids are ran together at 2 ohms. amp is a crossfire bmf 600.2 so i just have mids on one channel and the tweets on another channel. i have all speakers running active to the amp. MY QUESTION is what xover do i use to cross the tweets because the amp only has 1 xover freq knob so i just have it at its highest (250 htz) and then cross the tweets on the HU at 4khtz. i want to turn the xover on the amp down so i can let my mids do more work on the bass side but im scared if i turn it down it will blow the tweeters being set too low. PLEASE give me some insight [IMG]http://i65.photobucket.com/albums/h236/basketball3rulz/IMAG0461.jpg[/IMG] [/QUOTE]

Verification