Reply to thread

Message: <blockquote data-quote="RAM_Designs" data-source="post: 7380870" data-attributes="member: 566575"><p>The frequency ranges on the hpf area are simply crossover points that you can set by changing the dial.  Anything above that frequency will be played without any alteration to the sound via the hpf you just set, so you can just set it around 80hz and be just fine running your comps on any of the channels.  Channels 1&amp;2 just have a higher possible crossover point, which is of no importance to you right now.</p></blockquote><p></p>

Top