Reply to thread

Message

<blockquote data-quote="phyphoestilic" data-source="post: 2054995" data-attributes="member: 569258">Okay as of right now I am leaning toward theScanSpeakR2904/7000-00 Ring Radiator (1&quot; tweeters, they rated at 160rms, so 4 ohms should be fine from the amp)18W/8531G000 Revelator (7&quot; midbass, going with 8 ohm because midbass rated at 60rms, and my amp puts 125ish@4 ohms, so should be around 65ish at 8 ohms)withTru TechnologyF1 CrossoverI understand the inconviniece of these units not being easy Axis offset like most of the components, but since I am hoping to be competiting in SQ comps I will have to eventually go active with a right setup. So I might as well get it done right the first time //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gifI am still open to other opinions and would greatly appriciate input. (I plan on adding at least 1 more pair of midbass, sometime later on.)</blockquote>

[QUOTE="phyphoestilic, post: 2054995, member: 569258"] Okay as of right now I am leaning toward the ScanSpeak R2904/7000-00 Ring Radiator (1" tweeters, they rated at 160rms, so 4 ohms should be fine from the amp) 18W/8531G000 Revelator (7" midbass, going with 8 ohm because midbass rated at 60rms, and my amp puts 125ish@4 ohms, so should be around 65ish at 8 ohms) with Tru Technology F1 Crossover I understand the inconviniece of these units not being easy Axis offset like most of the components, but since I am hoping to be competiting in SQ comps I will have to eventually go active with a right setup. So I might as well get it done right the first time [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] I am still open to other opinions and would greatly appriciate input. (I plan on adding at least 1 more pair of midbass, sometime later on.) [/QUOTE]

Verification