Reply to thread

Message

<blockquote data-quote="BassAddictJ" data-source="post: 1072822" data-attributes="member: 560415">i&#039;ve run the 16-mc1000D an had experience with the mojo 2000DIMO....the xxx sealed (from experience) wont want much more than 1000W rms without the voice coil heatingup real bad....they stay WAY cooler in ported boxes. i ran the memphis 1000D to my XXX sealed and it still sounded great. any more power ina sealed box would be bad for it. Personally i&#039;d port it but i understand ur criteria and need for space so sealed it will be. ur amps kick *** BTW //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifI&#039;d say go ahead and run it at 4ohms, since that&#039;ll give the amp better control of the sub haveing the voice coils wired in series, you amp will ran much cooler, and the sub wont want too much more power than what you&#039;ll give it. and if you ever decided to port it, you can still run it at 4 ohms for daily, and burp it at 1 ohm for comps....&nbsp; or if you decided you want a lil more power for ur XXX&nbsp; then call RE and see how much it would be to ship back to RE and havem recone it to a dual 1 ohm config, i know it&#039;s $75 + ship, and if u live KY it may not be as bad as it was for me in tampa ($180 round trip for the sub).....ii tell you what though, ported, that sub would LLLOOOOVVEEE 1500w rms...then again if you get another xxx15 then 750w rms would be just fine for them sealed.......try it @ 4 ohms sealed and if it sucks, then get the rl-p&#039;s //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="BassAddictJ, post: 1072822, member: 560415"] i've run the 16-mc1000D an had experience with the mojo 2000D IMO....the xxx sealed (from experience) wont want much more than 1000W rms without the voice coil heatingup real bad....they stay WAY cooler in ported boxes. i ran the memphis 1000D to my XXX sealed and it still sounded great. any more power ina sealed box would be bad for it. Personally i'd port it but i understand ur criteria and need for space so sealed it will be. ur amps kick *** BTW [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] I'd say go ahead and run it at 4ohms, since that'll give the amp better control of the sub haveing the voice coils wired in series, you amp will ran much cooler, and the sub wont want too much more power than what you'll give it. and if you ever decided to port it, you can still run it at 4 ohms for daily, and burp it at 1 ohm for comps.. .. or if you decided you want a lil more power for ur XXX then call RE and see how much it would be to ship back to RE and havem recone it to a dual 1 ohm config, i know it's $75 + ship, and if u live KY it may not be as bad as it was for me in tampa ($180 round trip for the sub).....ii tell you what though, ported, that sub would LLLOOOOVVEEE 1500w rms ...then again if you get another xxx15 then 750w rms would be just fine for them sealed....... try it @ 4 ohms sealed and if it sucks, then get the rl-p's [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification