Reply to thread

Message

<blockquote data-quote="xterra02_pat" data-source="post: 1358774" data-attributes="member: 564939">OK, So heres all the info I can gather.&nbsp;&nbsp; My amp says is 1016watts at 1 ohm.&nbsp;&nbsp; But how do I even know if its at 1ohm or 4 ohm?&nbsp; &nbsp; &nbsp;&nbsp; Supposing the amp is at 1 ohm right now.&nbsp; My sub is in parallel.&nbsp; &nbsp; The settings on the amp are as followsInput Sensitivity (V):&nbsp;&nbsp; .6 or .7LPF Freq (Hz):&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 140B.R.F&nbsp; Freq (Hz):&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 160Amp Cont:&nbsp; ONPhase:&nbsp; 0 degreesBRF:&nbsp;&nbsp; OFFISF:&nbsp; ONISF Freq:&nbsp;&nbsp; 15Hz (Lowest)These were all set by a professional that I know when I had my 2 jl 15w3&#039;s in.&nbsp; He tuned the amp for them and these are the settings that are on it.&nbsp;&nbsp; I dont know what I should change if anything.&nbsp; I duno if this will help anyone diagnose what might be making this popping noise.</blockquote>

[QUOTE="xterra02_pat, post: 1358774, member: 564939"] OK, So heres all the info I can gather. My amp says is 1016watts at 1 ohm. But how do I even know if its at 1ohm or 4 ohm? Supposing the amp is at 1 ohm right now. My sub is in parallel. The settings on the amp are as follows Input Sensitivity (V): .6 or .7 LPF Freq (Hz): 140 B.R.F Freq (Hz): 160 Amp Cont: ON Phase: 0 degrees BRF: OFF ISF: ON ISF Freq: 15Hz (Lowest) These were all set by a professional that I know when I had my 2 jl 15w3's in. He tuned the amp for them and these are the settings that are on it. I dont know what I should change if anything. I duno if this will help anyone diagnose what might be making this popping noise. [/QUOTE]

Verification