Reply to thread

Message: <blockquote data-quote="mrray13" data-source="post: 2691344" data-attributes="member: 540942">usually caps are put into place to act as a crossover. a resistor can be used to attenuate the output. but i've not heard of using a capacitor as a protection circuit.can you get a link or picture of the actual capacitor used? our electronic guy has never heard of such a thing. he made a suggestion concerning just running a fuse inline with each tweeter. basicly put, start small, like 2.5 amp, crank your stereo. if it pops before full volume, try a larger fuse. stop when you get to the pointof being able to crank the system where you want it and don't blow a fuse. that way if there is a spike above that, pop goes the fuse and your tweeters are safe.wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee //content.invisioncic.com/y282845/emoticons/peace.gif.2db28b618ed8d1964ebbe2f5021d2c39.gif</blockquote>

Top