Reply to thread

Message

<blockquote data-quote="jkilgore29" data-source="post: 6368219" data-attributes="member: 614952">here is the ratingAmplifier Topology: Class A/B with patented AbsoluteSymmetry™ dual N-Channel MOSFET output designPower Supply: Unregulated MOSFET switching typeRated Power at 12.5 V (Stereo, all channels driven):45W RMS x 6 @ 4 ohms, 75W RMS x 6 @ 2 ohmsRated Power at 12.5 V (Bridged, all channels driven):90W RMS x 3 @ 8 ohms, 150W RMS x 3 @ 4 ohmsTHD at Rated Power:Signal to Noise Ratio: &amp;gt;104 dB referred to rated power(A-weighted, 20 Hz-20 kHz noise bandwidth)Frequency Response: 10 Hz - 25 kHz (+0, -1dB)Damping Factor: &amp;gt;200 @ 4 ohms per ch./50 Hz,&amp;gt;100 @ 2 ohm per ch. /50 HzSlew Rate: ± 22V/μsPower output at 14.4V supply voltage and 1% THD:70W RMS x 6 @ 4 ohms (14.4V, 1% THD)110W RMS x 6 @ 2 ohms (14.4V, 1% THD)Rated Power (Bridged):140W RMS x 3 @ 8 ohms (14.4V, 1% THD)220W RMS x 3 @ 4 ohms (14.4V, 1%</blockquote>

[QUOTE="jkilgore29, post: 6368219, member: 614952"] here is the rating Amplifier Topology: Class A/B with patented Absolute Symmetry™ dual N-Channel MOSFET output design Power Supply: Unregulated MOSFET switching type Rated Power at 12.5 V (Stereo, all channels driven): 45W RMS x 6 @ 4 ohms, 75W RMS x 6 @ 2 ohms Rated Power at 12.5 V (Bridged, all channels driven): 90W RMS x 3 @ 8 ohms, 150W RMS x 3 @ 4 ohms THD at Rated Power: Signal to Noise Ratio: >104 dB referred to rated power (A-weighted, 20 Hz-20 kHz noise bandwidth) Frequency Response: 10 Hz - 25 kHz (+0, -1dB) Damping Factor: >200 @ 4 ohms per ch./50 Hz, >100 @ 2 ohm per ch. /50 Hz Slew Rate: ± 22V/μs Power output at 14.4V supply voltage and 1% THD: 70W RMS x 6 @ 4 ohms (14.4V, 1% THD) 110W RMS x 6 @ 2 ohms (14.4V, 1% THD) Rated Power (Bridged): 140W RMS x 3 @ 8 ohms (14.4V, 1% THD) 220W RMS x 3 @ 4 ohms (14.4V, 1% [/QUOTE]

Verification