Reply to thread

Message

<blockquote data-quote="MIN_Roadkill" data-source="post: 1416458" data-attributes="member: 557807">I just got my comps installed and the midbass blows ***. It sounds ok at low volumes but anything over 50% volume and they sound like there is wave cancellation. The midbass goes from&nbsp; punch to plunk.&nbsp; I have a 95 bronco with the mids in factory locations and tweets about 8&quot; back and 1&quot; up.&nbsp; Here is all of the info I can think of at the moment.Pioneer premier 860mp (havent played much with the settings on it).Boston pro60 (mid set to component and tweet set to 0db)Pg 200.2 ( Hi=off Lo=off Bass boost=turned all the way down gain=28.8)Sub info3 Shocker Xtreme 15&quot; (24cube box tuned to 32hz)3 lanzar vibe 1200d (1.2ohm load on each subsonic=25 lo= around 60 gain=37.9)Here is pics of the drivers door deadening job. Passenger was done the same way.<img src="http://webpages.charter.net/min_roadkill/audio/1.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://webpages.charter.net/min_roadkill/audio/2.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://webpages.charter.net/min_roadkill/audio/3.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />I have a 1/4&#039; gap in the window seal from aging and wonder if that could be the problem. I can build a sealed enclosure inside of the door if that would help. I have no idea what to try next. Any help is greatly appreciated.</blockquote>

[QUOTE="MIN_Roadkill, post: 1416458, member: 557807"] I just got my comps installed and the midbass blows ***. It sounds ok at low volumes but anything over 50% volume and they sound like there is wave cancellation. The midbass goes from punch to plunk. I have a 95 bronco with the mids in factory locations and tweets about 8" back and 1" up. Here is all of the info I can think of at the moment. Pioneer premier 860mp (havent played much with the settings on it). Boston pro60 (mid set to component and tweet set to 0db) Pg 200.2 ( Hi=off Lo=off Bass boost=turned all the way down gain=28.8) Sub info 3 Shocker Xtreme 15" (24cube box tuned to 32hz) 3 lanzar vibe 1200d (1.2ohm load on each subsonic=25 lo= around 60 gain=37.9) Here is pics of the drivers door deadening job. Passenger was done the same way. [IMG]http://webpages.charter.net/min_roadkill/audio/1.jpg[/IMG] [IMG]http://webpages.charter.net/min_roadkill/audio/2.jpg[/IMG] [IMG]http://webpages.charter.net/min_roadkill/audio/3.jpg[/IMG] I have a 1/4' gap in the window seal from aging and wonder if that could be the problem. I can build a sealed enclosure inside of the door if that would help. I have no idea what to try next. Any help is greatly appreciated. [/QUOTE]

Verification