Reply to thread

Message

<blockquote data-quote="disturbedfuel15" data-source="post: 2181899" data-attributes="member: 570673">In general, you should keep the port within 1/4 of a wavelength away from the driver.&nbsp; If you have it tuned at 32hz, you just need to keep it within around 9 feet of the driver.&nbsp; This should be a fairly easy task to accomplish //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif&nbsp; Basically, where you put it isn&#039;t really an issue.... just don&#039;t be stupid and put it on the bottom of the box, and you should be good to go.&nbsp; If you really want to get all fancy and scientific about it though, if you position the vent on the rear of the box, it will further eliminate any unwanted midrange leakage.Alright, now as far as the vent...&nbsp; For the best performance, you are going to want the port to be square, 4.23&quot; x 4.23&quot;, and the length is going to be&nbsp; 10.04&quot; long.&nbsp; In standard terms, 4 1/4&quot; x 4 1/4&quot; x 10&quot;Good Luck!</blockquote>

[QUOTE="disturbedfuel15, post: 2181899, member: 570673"] In general, you should keep the port within 1/4 of a wavelength away from the driver. If you have it tuned at 32hz, you just need to keep it within around 9 feet of the driver. This should be a fairly easy task to accomplish [IMG]//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif[/IMG] Basically, where you put it isn't really an issue.... just don't be stupid and put it on the bottom of the box, and you should be good to go. If you really want to get all fancy and scientific about it though, if you position the vent on the rear of the box, it will further eliminate any unwanted midrange leakage. Alright, now as far as the vent... For the best performance, you are going to want the port to be square, 4.23" x 4.23", and the length is going to be 10.04" long. In standard terms, 4 1/4" x 4 1/4" x 10" Good Luck! [/QUOTE]

Verification