Reply to thread

Message

<blockquote data-quote="2loud4u" data-source="post: 2160915" data-attributes="member: 562346">Right now it is getting some what loud.-3DB test tones Ftw.But still not enough output for me.Changed a few setting on the ampGain set with -3db 50hz toneIntelli q set to 1/4 up12db slopeHpf 30hzlpf 80hzTurned head unit up to 45/63sub control all the way upeq FlatLoudness offturned up the gain till the voltage reached 49vPoped in some music and listed to the sub and it did not stress distort ect.....took reading of the speaker voltage during music and it was peaking around 36-39vBuilding alittle smaller box 2.5 cuft after displacement tune alittle higher maby 37-38hz 60-70 square inches of port area.This is really on a temp system I have changed my goals and getting a crx.2X15&quot; Fully decked out BTL&#039;s&nbsp; amp(s) not sure yet.Still not very happy with my 2500d so dont think I will get another.Maby 2 kicker 2500.1&#039;s</blockquote>

[QUOTE="2loud4u, post: 2160915, member: 562346"] Right now it is getting some what loud. -3DB test tones Ftw. But still not enough output for me. Changed a few setting on the amp Gain set with -3db 50hz tone Intelli q set to 1/4 up 12db slope Hpf 30hz lpf 80hz Turned head unit up to 45/63 sub control all the way up eq Flat Loudness off turned up the gain till the voltage reached 49v Poped in some music and listed to the sub and it did not stress distort ect..... took reading of the speaker voltage during music and it was peaking around 36-39v Building alittle smaller box 2.5 cuft after displacement tune alittle higher maby 37-38hz 60-70 square inches of port area. This is really on a temp system I have changed my goals and getting a crx. 2X15" Fully decked out BTL's amp(s) not sure yet. Still not very happy with my 2500d so dont think I will get another. Maby 2 kicker 2500.1's [/QUOTE]

Verification