Reply to thread

Message

<blockquote data-quote="2loud4u" data-source="post: 2158058" data-attributes="member: 562346">Ok here is the story on it.12&quot; Mt&nbsp; 3 cubes @ 35hz&nbsp; 50 square inches of port areaDual 1.4 ohms coilsWired to the amp it reads 0.6 ohms.2500D @ 0.6 OhmsVoltage at speaker outs 50v0db 50hz test tonehead unit turned up 3/4 of the waySub controll all the way up.Voltage is a Steady 14.2v car on.Just not getting loud at all.50 hz test tone sounds some what loud but no wheres close to what it should be doin.During songs the voltage at the speaker terminals is 20.2v maxSetting on 2500dGain set with 0db test toneIntelli q&nbsp; set to 0Hpf set to 30hzlow pass set to around 80hzphase set to 012db slopeI am alittle upset I thought this thing would get loud but not even close.even with the trunk open and play throw it up ect... the sub hardly moves and also very little air comes out the port.</blockquote>

[QUOTE="2loud4u, post: 2158058, member: 562346"] Ok here is the story on it. 12" Mt 3 cubes @ 35hz 50 square inches of port area Dual 1.4 ohms coils Wired to the amp it reads 0.6 ohms. 2500D @ 0.6 Ohms Voltage at speaker outs 50v 0db 50hz test tone head unit turned up 3/4 of the way Sub controll all the way up. Voltage is a Steady 14.2v car on. Just not getting loud at all. 50 hz test tone sounds some what loud but no wheres close to what it should be doin. During songs the voltage at the speaker terminals is 20.2v max Setting on 2500d Gain set with 0db test tone Intelli q set to 0 Hpf set to 30hz low pass set to around 80hz phase set to 0 12db slope I am alittle upset I thought this thing would get loud but not even close. even with the trunk open and play throw it up ect... the sub hardly moves and also very little air comes out the port. [/QUOTE]

Verification