Reply to thread

Message

<blockquote data-quote="NSTALN" data-source="post: 8667766" data-attributes="member: 588169">MRV-F250Specs:&nbsp; &nbsp; - RMS Continuous Power output (@ 12.0V 20 Hz to 20 kHz)&nbsp; &nbsp; 25 watts x 4 @ 4 ohms, 0.08% THD&nbsp; &nbsp; 35 watts x 4 @ 2 ohms, 0.3% THD&nbsp; &nbsp; 70 watts bridged into 4 ohms, 0.3% THD&nbsp; &nbsp; - Dynamic Power (a 14.4V, 20 Hz to 20 kHz)&nbsp; &nbsp; 40 watts x 4 @ 4 ohms, 0.08% THD&nbsp; &nbsp; 50 watts x 4 @ 2 ohms, 0.3% THD&nbsp; &nbsp; 100 watts bridged into 4 ohms, 0.3% THD&nbsp; &nbsp; Frequency Response - 10 Hz to 50 kHz (+0, -1 dB)&nbsp; &nbsp; Signal to Noise Ratio - 100dB&nbsp; &nbsp; Slew Factor - Greater than 5&nbsp; &nbsp; Inout Sensitivity (for rated power output) - 200mV to 4.0V (1.0V at center detent)&nbsp; &nbsp; Active Network Frequency and Slope - 50 to 200 Hz, 12 db per Octave&nbsp; &nbsp; Dimensions: (W x H x D) 240mm X 53mm x250mm ( 9-7/16&quot; x 2-1/16&quot; x 9-14/16&quot;)&nbsp; &nbsp; Weight: 3.0Kg (6lbs)</blockquote>

[QUOTE="NSTALN, post: 8667766, member: 588169"] MRV-F250 [B]Specs:[/B] - RMS Continuous Power output (@ 12.0V 20 Hz to 20 kHz) 25 watts x 4 @ 4 ohms, 0.08% THD 35 watts x 4 @ 2 ohms, 0.3% THD 70 watts bridged into 4 ohms, 0.3% THD - Dynamic Power (a 14.4V, 20 Hz to 20 kHz) 40 watts x 4 @ 4 ohms, 0.08% THD 50 watts x 4 @ 2 ohms, 0.3% THD 100 watts bridged into 4 ohms, 0.3% THD Frequency Response - 10 Hz to 50 kHz (+0, -1 dB) Signal to Noise Ratio - 100dB Slew Factor - Greater than 5 Inout Sensitivity (for rated power output) - 200mV to 4.0V (1.0V at center detent) Active Network Frequency and Slope - 50 to 200 Hz, 12 db per Octave Dimensions: (W x H x D) 240mm X 53mm x250mm ( 9-7/16" x 2-1/16" x 9-14/16") Weight: 3.0Kg (6lbs) [/QUOTE]

Verification