Reply to thread

Message: <blockquote data-quote="MEMPHISFLEX" data-source="post: 2679382" data-attributes="member: 573793"><p>Im currently using a hifonics xx-colossus II bridged in 2 ohms powering 2 ma audio hk12x2s and its loud, but i wanted all ma audio, so i got the ma audio hk4000d, i get it all hooked up and go to tune the amp and i cant even turn it up with out it cutting out, it dont turn off just cuts out sound to the subs,  i dont know what would cause this.  Im using 200amp anl fuses under the hood, and between the amp and kinetik 2400 in the rear, should i change them to 300amp anl's each, and the other thing is i got a 2ch 9vrms memphis line driver, its only turned up 1/2 way, but i need some help why this amp keeps cutting out when i turn it up, the gain is not even a 1/4 of the way and im running 14.8v-15.2v  with the colossus and only dropping to the mid 13's for volts and thats at idel, so just need some pointers on what to do.</p></blockquote><p></p>

Top