Reply to thread

Message: <blockquote data-quote="Jmac4119" data-source="post: 6605094" data-attributes="member: 618485"><p>Well, I have been trying to install a Kenwood DNX5140 and have run into a problerm! I wired everything up and im not getting power to the unit. So I checked my yellow and red power wires going into the harness and I am not getting voltage to the red ignition wire. That would explain why im not getting power to the unit, but now i dont know where to begin to fix it. My old head unit was stolen a few months ago, so im guessing in the process of them yanking everything out something had to of happend to that red wire. As far as i can follow that red wire behind the dash I see no open point, so im lost and could use any help! Thanks</p></blockquote><p></p>

Top