Reply to thread

Message: <blockquote data-quote="photocrazy8" data-source="post: 2541252" data-attributes="member: 566925"><p>Ok so if i have two dual 4 ohm subs and i wire each one down to 2 ohms. Then i have an amp that has four inputs, two positive and two negitive. if i hook both subs up to the amp (two seperate 2 ohm loads), the amp will see a one ohm load over all since it just internaly bridges the subs? correct or wrong?</p></blockquote><p></p>

Verification

Top

Menu