Reply to thread

Message

<blockquote data-quote="freeman45" data-source="post: 8341168" data-attributes="member: 664220">//Hello, i&#039;m trying to install my first deck, and I need help!I have one wire left on my new harness (blue/white &quot;remote-control&quot;) that needs to be spliced, and I have two wires left on my car that I can splice it with.The diagram i&#039;m following says to splice with the power-atenna-trigger wire. But my car doesn&#039;t have a power atenna. So I pulled out my volt meter and here&#039;s what I got :Wire #1 - I turn the key 1-notch (radio turns on) &amp;amp; 13 volts comes from the plastic harness that&#039;s attached to the deck. When I cut the wire, nothing seems to go off. Not the lights, or power mirrors, nothing changes. But the power comes FROM the deck. My car might have a factory installed amp but i&#039;m not sure. Is that the amp wire?Wire #2 - 13v comes from the car wire. The deck&#039;s light&#039;s turn off when I cut this wire, but the deck still works.So which one do I attach that white/blue wire to?</blockquote>

[QUOTE="freeman45, post: 8341168, member: 664220"] [COLOR=lemonchiffon]/[/COLOR] [COLOR=lemonchiffon]/[/COLOR] Hello, i'm trying to install my first deck, and I need help! I have one wire left on my new harness [B](blue/white "remote-control")[/B] that needs to be spliced, and I have two wires left on my car that I can splice it with. The diagram i'm following says to splice with the [B]power-atenna-trigger wire[/B]. But my car doesn't have a power atenna. So I pulled out my volt meter and here's what I got : [B]Wire #1[/B] - I turn the key 1-notch (radio turns on) & 13 volts comes from the plastic harness that's attached to the deck. When I cut the wire, nothing seems to go off. Not the lights, or power mirrors, nothing changes. But the power comes FROM the deck. My car might have a factory installed amp but i'm not sure. Is that the amp wire? [B]Wire #2 [/B]- 13v comes from the car wire. The deck's light's turn off when I cut this wire, but the deck still works. [B]So which one do I attach that white/blue wire to?[/B] [/QUOTE]

Verification