Reply to thread

Message

<blockquote data-quote="trunks9_us" data-source="post: 2807181" data-attributes="member: 562522">ok so i have a jensen hu but i also have a zapco digital 4 chan amp i am about to put in for my comps well the amp i have is a zapco dc reference 1000.4 and the amp has onboard1 - Output and input Gain2 - Input mode: Rt, Lft, or Sum Mono3 - Crossover mode: High Pass, Low pass, Band Pass4 - Crossover Slope from 6 - 24dB5 - Q-Bass Equalization6 - Network Node Position7 - Time Delay by both time and distance8 - 10 bands of Parametric Equalization per Channelwell my jensen hu doesnt have any good sq control but since this amp has its on dsp on there and eq then shouldnt it not matter what hu i am using is this correct? I mean cause i am using a external processor well the amp is what i mean so once i tunr the amp i am set is this correct or would i still really need a good hu which i do plan on upgrading in about 6 months but dont dis my hu i just want to know if this would work.</blockquote>

[QUOTE="trunks9_us, post: 2807181, member: 562522"] ok so i have a jensen hu but i also have a zapco digital 4 chan amp i am about to put in for my comps well the amp i have is a zapco dc reference 1000.4 and the amp has onboard 1 - Output and input Gain 2 - Input mode: Rt, Lft, or Sum Mono 3 - Crossover mode: High Pass, Low pass, Band Pass 4 - Crossover Slope from 6 - 24dB 5 - Q-Bass Equalization 6 - Network Node Position 7 - Time Delay by both time and distance 8 - 10 bands of Parametric Equalization per Channel well my jensen hu doesnt have any good sq control but since this amp has its on dsp on there and eq then shouldnt it not matter what hu i am using is this correct? I mean cause i am using a external processor well the amp is what i mean so once i tunr the amp i am set is this correct or would i still really need a good hu which i do plan on upgrading in about 6 months but dont dis my hu i just want to know if this would work. [/QUOTE]

Verification