Reply to thread

Message: <blockquote data-quote="12VoltInstaller" data-source="post: 3275117" data-attributes="member: 564140"><p>Your RCA's may have be shorted to ground or your hi/lo converter may be connected to the wrong "speaker" wire(s).  It could also be the converter being internally shorted/damaged.  If only when you plug in your preamp section do you have this issue...it is either a problem with your rca cables or your amp has a problem in its pre-amp section.  try to plug in an ipod or inexpensive mp3 player (just in case the amplifier may fry your headphone output if a larger problem exists in the amplifier).... plug that in via 3.5 mm jack to rca cable to your amps input.  Substitution of preamp signal is a good place to start with what your describing, unless Im reading it incorrectly... let us know how you do....//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</p></blockquote><p></p>

Top