Reply to thread

Message: <blockquote data-quote="mrj858" data-source="post: 8677628" data-attributes="member: 634131"><p>This is not entirely true...I'm wired at .4 per amp and I was at .4 twice during my impedance sweep using my IM/SG to find both tuning frequencies in my 6th...hell I stayed under 1ohm from 20hz-30hz didn't start rising until after 31hz (peaked at 1.6 ohms at 35hz) then started falling under 1ohm again until the upper 50hz range....I did notice the less port area I had in the rear chamber the higher my rise was </p></blockquote><p></p>

Top