Reply to thread

Message

<blockquote data-quote="cronic" data-source="post: 3545002" data-attributes="member: 578993">Hey guys. I am in the process of the installing my system. I had planned on running 2-way with the rainbow SLC-265. While the highs were awesome I couldn’t get the midrange and midbass that I was after. Having always used 3 way active setups years ago I have decided that is direction I want to go again. So far I have built the sub enclosure, door pods for 6.5” midbass, and floor pods for 4” mids and tweets. That brings me to my current dilemma. Having not keep up with car audio for the last 10 years I am having difficulty deciding on what I want in way of speakers. The system will have the following components:Eclipse CD7000PPI PRO650 50 X 4 for mids, midbass, and tweets and 600w for the single 12 sub.Currently have an old rf dvc hx2 12” in 1.25 cubic feet sealed, but will probably go with an idmax 12” in the future.So my question is what should I go with for the 6.5, 4, and tweets. My critera is the tweets must be soft dome preferably silk, and the 6.5” can’t be deeper than 3.125” and must have awesome midbass. I have considered the cx image dynamics but am not sure. What do you guys suggest? My budget is 500.00 max and used will be fine if it allows me to gain performance for the price.</blockquote>

[QUOTE="cronic, post: 3545002, member: 578993"] Hey guys. I am in the process of the installing my system. I had planned on running 2-way with the rainbow SLC-265. While the highs were awesome I couldn’t get the midrange and midbass that I was after. Having always used 3 way active setups years ago I have decided that is direction I want to go again. So far I have built the sub enclosure, door pods for 6.5” midbass, and floor pods for 4” mids and tweets. That brings me to my current dilemma. Having not keep up with car audio for the last 10 years I am having difficulty deciding on what I want in way of speakers. The system will have the following components: Eclipse CD7000 PPI PRO650 50 X 4 for mids, midbass, and tweets and 600w for the single 12 sub. Currently have an old rf dvc hx2 12” in 1.25 cubic feet sealed, but will probably go with an idmax 12” in the future. So my question is what should I go with for the 6.5, 4, and tweets. My critera is the tweets must be soft dome preferably silk, and the 6.5” can’t be deeper than 3.125” and must have awesome midbass. I have considered the cx image dynamics but am not sure. What do you guys suggest? My budget is 500.00 max and used will be fine if it allows me to gain performance for the price. [/QUOTE]

Verification