Reply to thread

Message: <blockquote data-quote="keep_hope_alive" data-source="post: 6871834" data-attributes="member: 576029">Most likely, 4 awg will be enough, if your length is less than 12' - I consider you to be in the 90A range in the table below.  If you are more than 12' then look at 2 awg or 0 awg.  The inline fuse is sized for the wire.  If you want to have one power wire ran to the back, then split to two amps - you'll need a way to do that safely - that is where the distribution block comes in.  If the wire size in is the same as the wire size out - you don't need a fused distribution block.  If the wire in is larger, then you want fused so you protect the smaller wires.Visit this page and read it (provides fuse sizing):<a href="http://www.bcae1.com/fuses.htm" target="_blank">FUSES</a><img src="http://74.50.20.110/wiringdiagram.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

Top