Reply to thread

Message: <blockquote data-quote="akheathen" data-source="post: 7490694" data-attributes="member: 629234"><p>definitely purdy amps.  have you tried powering it up with the speaker wires off?  is the light on the left side of the board coming on?  can you hear it buzz or ring?  i have a few that i'm about to run through the bench, and, from what i've seen the transformer windings are the main weak point, but they are built pretty good other-wise.  if you do get it to power up without going into protect, check the output for dc voltage (should not be any)  also, check for corrosion on the jumpers, etc.</p></blockquote><p></p>

Top