Reply to thread

Message

<blockquote data-quote="Prowler573" data-source="post: 3171169" data-attributes="member: 561023">//content.invisioncic.com/y282845/emoticons/wave.gif.002382ce7d7c19757ab945cc69819de1.gifGreetings to the new guy from Finland!As far as 6x9s are concerned, if you&#039;re determined to use that size driver, the T595 is going to be tough to beat.They are essentially a re-release of JBL&#039;s famed T545 3-way coaxial 6x9 and by all accounts from those who have heard them they are every bit as good as the older ones were.Having personally owned a set of the T545s if the 595s are even half as good, keep &#039;em. You&#039;re solid there.Those 1507s make their biggest power @ 4 Ohms bridged, correct? If I&#039;m remembering that correctly and additionally my assumption is that you&#039;re wanting to use one Alpine amp per Kicker L7 then you&#039;re going to want to get the Dual 2 Ohm Solobarics so that each one can be wired in series to a 4 Ohm load to be compatible with those big Alpines while they are bridged.As far as components go - what size components are you wanting to go with? If you&#039;re wanting to go moderately high-end to really high-end then I&#039;m not so sure you&#039;re going to be able to find anything in a 4x6. There&#039;s going to be some modifications needed to get either a 5.25&quot; or 6.5&quot; set depending on what suits you best.</blockquote>

[QUOTE="Prowler573, post: 3171169, member: 561023"] [IMG]//content.invisioncic.com/y282845/emoticons/wave.gif.002382ce7d7c19757ab945cc69819de1.gif[/IMG] Greetings to the new guy from Finland! As far as 6x9s are concerned, if you're determined to use that size driver, the T595 is going to be tough to beat. They are essentially a re-release of JBL's famed T545 3-way coaxial 6x9 and by all accounts from those who have heard them they are every bit as good as the older ones were. Having personally owned a set of the T545s if the 595s are even half as good, keep 'em. You're solid there. Those 1507s make their biggest power @ 4 Ohms bridged, correct? If I'm remembering that correctly and additionally my assumption is that you're wanting to use one Alpine amp per Kicker L7 then you're going to want to get the Dual 2 Ohm Solobarics so that each one can be wired in series to a 4 Ohm load to be compatible with those big Alpines while they are bridged. As far as components go - what size components are you wanting to go with? If you're wanting to go moderately high-end to really high-end then I'm not so sure you're going to be able to find anything in a 4x6. There's going to be some modifications needed to get either a 5.25" or 6.5" set depending on what suits you best. [/QUOTE]

Verification