Reply to thread

Message

<blockquote data-quote="Phreaker" data-source="post: 2174466" data-attributes="member: 567899">Huh...you&#039;re going to make the ported box you already have and cut it so it is smaller and make it a sealed box?!Bwahahahahaha......You can tune a sealed box but why do you want to go sealed over ported?Build another box dippie.....$20-$25 for a sheet of 3/4&quot; thick 4&#039; x 8&#039; MDF at HD.Slap a T-guide on the circular saw and bam str8 accurate cuts....oh yeah,be sure to buy a fine cut/finishing blade...don&#039;t use a ripping blade.If you can&#039;t get a saw or don&#039;t have one you can always buy one (helps to make more boxes and see what&#039;s best) or if you can&#039;t afford one you can have HD make the cuts for free but they cant do any cuts smaller then 12&quot; and sometimes they are&#039;t level or straight cuts becuase of people focingthe blade instead of letting IT do he work....Get your own Circular saw or borrow someones and get a T-guide for it.Draw out a cut sheet and use that for making the cuts.What size sealed box does Pioneer recommend for those subs?End Note.....Ported gets ou louder.</blockquote>

[QUOTE="Phreaker, post: 2174466, member: 567899"] Huh...you're going to make the ported box you already have and cut it so it is smaller and make it a sealed box?! Bwahahahahaha...... You can tune a sealed box but why do you want to go sealed over ported? Build another box dippie.....$20-$25 for a sheet of 3/4" thick 4' x 8' MDF at HD. Slap a T-guide on the circular saw and bam str8 accurate cuts....oh yeah,be sure to buy a fine cut/finishing blade...don't use a ripping blade. If you can't get a saw or don't have one you can always buy one (helps to make more boxes and see what's best) or if you can't afford one you can have HD make the cuts for free but they cant do any cuts smaller then 12" and sometimes they are't level or straight cuts becuase of people focingthe blade instead of letting IT do he work.... Get your own Circular saw or borrow someones and get a T-guide for it. Draw out a cut sheet and use that for making the cuts. What size sealed box does Pioneer recommend for those subs? End Note.....Ported gets ou louder. [/QUOTE]

Verification