Reply to thread

Message

<blockquote data-quote="JerDerv" data-source="post: 8289589" data-attributes="member: 662017">Okay then, heres what i have decided on so far. Kinetik HC2400 under the hood 10ft of KnuKonceptz KCA 0Ga for the big 3. Will be about $300 all said and done right. While im running the E12 at 750w ill continue using my stinger 4ga power wire. Next month ill pick up more KnuKonceptz 0ga to run back into a distribution block. This should be fine for a 1050w rms system. Ill do the alternator upgrade when i run the DSC1500.1 at 1 ohm.Today i completed all the wiring to the powerbass components up front and spent a fair amount of time playing with filters, head unit settings, line converter settings, amp settings, etc... I feel i am about 75% of the way there as far as dialing in the tuning but its hard to tell without a sub. I also dont even have the 6.5s in the back yet. I ordered some carpeted mdf spacer rings to make them fairly straight forward to mount in my rear doors so that should happen soon enough. The DSC1500.1 gets here on Monday! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gifI really need to choose how i want to do sound deadening. I will be removing all the interior and doing the entire car most likely with closed cell foam and mass loaded vinyl. Again ill be attempting to do it on a budget but i wont cut corners if it means making big sacrifices in end result.</blockquote>

[QUOTE="JerDerv, post: 8289589, member: 662017"] Okay then, heres what i have decided on so far. Kinetik HC2400 under the hood 10ft of KnuKonceptz KCA 0Ga for the big 3. Will be about $300 all said and done right. While im running the E12 at 750w ill continue using my stinger 4ga power wire. Next month ill pick up more KnuKonceptz 0ga to run back into a distribution block. This should be fine for a 1050w rms system. Ill do the alternator upgrade when i run the DSC1500.1 at 1 ohm. Today i completed all the wiring to the powerbass components up front and spent a fair amount of time playing with filters, head unit settings, line converter settings, amp settings, etc... I feel i am about 75% of the way there as far as dialing in the tuning but its hard to tell without a sub. I also dont even have the 6.5s in the back yet. I ordered some carpeted mdf spacer rings to make them fairly straight forward to mount in my rear doors so that should happen soon enough. The DSC1500.1 gets here on Monday! [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] I really need to choose how i want to do sound deadening. I will be removing all the interior and doing the entire car most likely with closed cell foam and mass loaded vinyl. Again ill be attempting to do it on a budget but i wont cut corners if it means making big sacrifices in end result. [/QUOTE]

Verification