Reply to thread

Message

<blockquote data-quote="00PewterSS" data-source="post: 1006943" data-attributes="member: 562040">Currently I have a IDQ12 in a fiberglass stealth box I built that is about 0.7cuft.&nbsp; This is being driven by 250W.&nbsp; I am not happy with the sound because the enclosure is just too small for the 12&quot;.&nbsp; It hits extremely hard, but sacrafices low bass.I just bought a PPI4100 which I plan on powering my Focal 165K2 with and a sub.&nbsp; I have been debating on what I want to do for a while.&nbsp; All I know for sure is that I&#039;m going to try some &#039;05 Alpine Type R.&nbsp; Here are my ideas:1.&nbsp; Put a 10&quot; Alpine R in the stealth box and power with 400W RMS2.&nbsp; Build a box for a 15&quot; Alpine R with 400W3.&nbsp; Build a box 2x10&quot; or 2x12&quot; Alpine R with 400W4.&nbsp; Build a box for 2x10&quot; or 2x12&quot; Alpine R.&nbsp; Run my front channel tri-way with a crossover power 1 sub with 400W from triway, the other 400W off the rear channels of the amp5.&nbsp; Buy a PPI2100 to power the front and power 2 subs with the PPI4100Whew...&nbsp; option 1 cost me $75 and building a new baffle for the stealth box but I don&#039;t know if I would be happy.Thanks,Brian</blockquote>

[QUOTE="00PewterSS, post: 1006943, member: 562040"] Currently I have a IDQ12 in a fiberglass stealth box I built that is about 0.7cuft. This is being driven by 250W. I am not happy with the sound because the enclosure is just too small for the 12". It hits extremely hard, but sacrafices low bass. I just bought a PPI4100 which I plan on powering my Focal 165K2 with and a sub. I have been debating on what I want to do for a while. All I know for sure is that I'm going to try some '05 Alpine Type R. Here are my ideas: 1. Put a 10" Alpine R in the stealth box and power with 400W RMS 2. Build a box for a 15" Alpine R with 400W 3. Build a box 2x10" or 2x12" Alpine R with 400W 4. Build a box for 2x10" or 2x12" Alpine R. Run my front channel tri-way with a crossover power 1 sub with 400W from triway, the other 400W off the rear channels of the amp 5. Buy a PPI2100 to power the front and power 2 subs with the PPI4100 Whew... option 1 cost me $75 and building a new baffle for the stealth box but I don't know if I would be happy. Thanks, Brian [/QUOTE]

Verification