Reply to thread

Message

<blockquote data-quote="timpact14" data-source="post: 2806407" data-attributes="member: 573328"><p>im running a fosgate p450.4..trying to push some alpine type x&#039;s and some mtx mids..both of these components are rated at 4ohms..@half gain the amp goes in to protect mode when the type x&#039;s are hooked up, but does nt do it for the mtx&#039;s..the type x&#039;s do require a bit more power but @ 4ohms the amp should push them fine at 75w rms...also for some reason the &quot;right&quot; channels sound louder &amp;amp; are the one&#039;s that cause it to go into protect...the left sounds lifeless &amp;amp; crappy. Took an ohm meter to the amp &amp;amp; the right channels shw abt 2-3ohms &amp;amp; left abt 6ohms...//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif i tried everything so far //content.invisioncic.com/y282845/emoticons/*******.gif.a649d21efc0d1fd4890a6428166586c1.gif other than changing the ground, but even then will that cause the amp to show a different ohm reading?....im i wiring the type x&#039;s wrong for this amp? thx for any help/feedback..</p></blockquote><p></p>

[QUOTE="timpact14, post: 2806407, member: 573328"] im running a fosgate p450.4..trying to push some alpine type x's and some mtx mids..both of these components are rated at 4ohms..@half gain the amp goes in to protect mode when the type x's are hooked up, but does nt do it for the mtx's..the type x's do require a bit more power but @ 4ohms the amp should push them fine at 75w rms...also for some reason the "right" channels sound louder & are the one's that cause it to go into protect...the left sounds lifeless & crappy. Took an ohm meter to the amp & the right channels shw abt 2-3ohms & left abt 6ohms...[IMG]//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif[/IMG] i tried everything so far [IMG]//content.invisioncic.com/y282845/emoticons/*******.gif.a649d21efc0d1fd4890a6428166586c1.gif[/IMG] other than changing the ground, but even then will that cause the amp to show a different ohm reading?....im i wiring the type x's wrong for this amp? thx for any help/feedback.. [/QUOTE]

Verification