Reply to thread

Message: <blockquote data-quote="daddy_j" data-source="post: 5117422" data-attributes="member: 592529"><p>Ok here we go, I have built three boxes and and modded them as much as I could before destroying them. I have tried 1.5 cubes per, and 2cubes per, and even 2.5cubes. Now I need the advise from the pros. I have a SS10000D, and 2 solox10s dual 2ohm (.5 ohms altogether). My vehicle is a 89crx and is strickly a comp car. Not wanting it to sound good, just straight SPL. Just burping, or an occational 30second burps. The tuning can be where ever you think will hit the hardest in a crx. This is for Usaci events with the door open and mic on the passenger floor. I dont really want to wall it off because that would put me in a mod class with the sponcered guys who are hitting +155dbs. I just can't seem to get the port tuning right. My highest to date in the crx with the equipment listed above is 149.2dbs, and then I started messing with the port and have only been going down ever since. Yesterday went all the way down to 147.6dbs. So as you can see I need help. I will take every responce into consideration. So please help with a design. I also have 4 2400kinitiks. Just really asking for a box recomondation. I have no preference. Subs up, down, left right, ports up, down, left right, two chambers, one chamber, 2boxes or one box, it doesnt matter. Please help. Usable space in the crx is 14.5 inches tall, 32inches wide, and 40 inches length. But the 40 inches wont leave room for the ports to breath. I know there are alot of pros on this site that have delt with either a crx or solox10. thanks to anyone who took time to read the whole post sorry its so long. But I want you guys to see that I am trying on my own, and not just paying for everything with mommy and daddy's money. thanks</p></blockquote><p></p>

Verification

Top

What's new

Forum list