Reply to thread

Message

<blockquote data-quote="HiFiMike" data-source="post: 8347023" data-attributes="member: 664477">Thank you for the quick reply.I forgot to mention in my initial post that I also have one other sub amp at my disposal.&nbsp; I attempted to edit the OP but was unable to. The amp is a <a href="http://www.crutchfield.com/S-S2NzpYryGhH/p_020DPX1155/Clarion-DPX11551.html" target="_blank">clarion dpx11551</a> capable of 1550@2 ohms. Perhaps this amp is more well suited for this application, no? I&#039;m not well versed on the subject of quality as far as the cadence and clarion or any other brands are concerned, as I am fairly new to the subject of mobile audio.I watched the video a few times and have a better understanding of the options now. It seems like I should also choose yes for the pole chamfer (enhanced cooling) and the I heat ring (enhanced musical range) options as well, to keep the sub as cool as possible, correct?The video, at 3:20, says the spider option is only necessary for high power ported applications concerning the Fi Q. You&#039;ve recommended yes for that option despite my setup running equal to or less than RMS power, in a sealed enclosure. Will the &quot;yes&quot; spider option have any cons?As for as an internal lead, you&#039;re saying if I choose yes it will come with terminals, and if no, will there just be a wire hanging from the sub without a terminal?</blockquote>

[QUOTE="HiFiMike, post: 8347023, member: 664477"] Thank you for the quick reply. I forgot to mention in my initial post that I also have one other sub amp at my disposal. I attempted to edit the OP but was unable to. The amp is a [URL="http://www.crutchfield.com/S-S2NzpYryGhH/p_020DPX1155/Clarion-DPX11551.html"]clarion dpx11551[/URL] capable of 1550@2 ohms. Perhaps this amp is more well suited for this application, no? I'm not well versed on the subject of quality as far as the cadence and clarion or any other brands are concerned, as I am fairly new to the subject of mobile audio. I watched the video a few times and have a better understanding of the options now. It seems like I should also choose yes for the pole chamfer (enhanced cooling) and the I heat ring (enhanced musical range) options as well, to keep the sub as cool as possible, correct? The video, at 3:20, says the spider option is only necessary for high power ported applications concerning the Fi Q. You've recommended yes for that option despite my setup running equal to or less than RMS power, in a sealed enclosure. Will the "yes" spider option have any cons? As for as an internal lead, you're saying if I choose yes it will come with terminals, and if no, will there just be a wire hanging from the sub without a terminal? [/QUOTE]

Verification