Reply to thread

Message: <blockquote data-quote="TheUnderFighter" data-source="post: 7423596" data-attributes="member: 631325">You'll also need to run speaker wiring for the speakers, to the amp. You can either do this by running wiring directly from the speakers, to the amp. Or if it's easier, Just splice in right where the factory wiring connects to the HU. I'd also probably look at getting a new head unit.But your power wiring diagram is correct, and the 4gague to 8 gauge should be plenty sufficient. Though, if you think you'll want room to grow later, it might be better, and cheaper in the long run, to just do a run of 1/0 from the bat to the distro block. But if you don't have any desire to get bigger or louder in the future, then what you have now will be more than sufficient.</blockquote>

Top