Reply to thread

Message

<blockquote data-quote="Pondiflr" data-source="post: 8554823" data-attributes="member: 672560">Hey everyone whats up! I stumbled on this site looking for 4th order ski pass blow through box design.The car I&#039;ll be using is a 2006 Acura TL with Navi system. My plans for this build is to get as much SPL as possible. I&#039;m going to be using 2 12&#039;&#039; Audiopipe TXX-BD2. The TL has a funny trunk space very wide opening towards the front but towards the back gets very narrow. The measurements I have are;L - 1FT|11&#039;&#039; or 2FTW - 30&#039;&#039; ( I can squeeze out 31&#039;&#039; but I&#039;m not sure if I should play it safe and stay with 30&#039;&#039;)H - 15&#039;&#039;For the port opening measurements are;W - 6 1/2&#039;&#039;H - 10&#039;&#039;The amp I will be using is old school Lanzar 700/2. If anyone could recommend a better amp for my setup I would greatly appreciate it.I actually found TaylorFade&#039;s 4th order box build on google but no specs on the box was posted on here. I would really appreciate it if anyone on here can build me a box design spread sheet with measurements to cut. I&#039;ll even pay just the person for taking their time doing this for me. I just want to get this box going.PS I&#039;m new to building boxes but not new to building car systems. Ive doing my research lately and understanding the most basic so please excuse me if nothing doesn&#039;t make sense. I will try my best to correct it. Thanks guys!</blockquote>

[QUOTE="Pondiflr, post: 8554823, member: 672560"] Hey everyone whats up! I stumbled on this site looking for 4th order ski pass blow through box design. The car I'll be using is a 2006 Acura TL with Navi system. My plans for this build is to get as much SPL as possible. I'm going to be using 2 12'' Audiopipe TXX-BD2. The TL has a funny trunk space very wide opening towards the front but towards the back gets very narrow. The measurements I have are; L - 1FT|11'' or 2FT W - 30'' ( I can squeeze out 31'' but I'm not sure if I should play it safe and stay with 30'') H - 15'' For the port opening measurements are; W - 6 1/2'' H - 10'' The amp I will be using is old school Lanzar 700/2. If anyone could recommend a better amp for my setup I would greatly appreciate it. I actually found TaylorFade's 4th order box build on google but no specs on the box was posted on here. I would really appreciate it if anyone on here can build me a box design spread sheet with measurements to cut. I'll even pay just the person for taking their time doing this for me. I just want to get this box going. PS I'm new to building boxes but not new to building car systems. Ive doing my research lately and understanding the most basic so please excuse me if nothing doesn't make sense. I will try my best to correct it. Thanks guys! [/QUOTE]

Verification