Reply to thread

Message

<blockquote data-quote="renier" data-source="post: 1762723" data-attributes="member: 568053">Re: stiil the new L7s15 and the lanzar amp--------------------------------------------------------------------------------hei!i&#039;ve put the wirings of the sub parallel..it&#039;s loud as hell,but it&#039;s still bridge on the ampli..the ampli says that it&#039;s only brigdeable at 4ohm..my sub is a dual 4,so when i use series wires,i get 8ohms..and it sucks..at 2ohms, the body of my Suv shake and make a lot of noises caused by frictioning of something,i don&#039;t know..i&#039;m just waiting the ampli to protect,or 2 get faulty..my ported box(used w/ a keicker es previously)can hold it..the mdf in front vibrate and make noises..so i can&#039;t enjoy the break in..i don&#039;t know if i&#039;m smelling the sub burning or the ampli or the mdf..this morning, i&#039;ve took a look and tried it again..w/ the engine on..my 2.4 farads lanzar capacitor at first was good..the current was always bet. 10.2 and 12.5..suddenly,it dropped at 8..7..6.. and it turned off by itself,turning off my whole system..what that means?i looked at my alty,and it&#039;s only 45~?or 65~..this is my dad&#039;s vehicle,that&#039;s why i can&#039;t make modifications by myself w/o telling him..but the system is mine,i brought it..can you help me again by tell me bout HTZ,how to calculate it and how to tune a box to the deepest frequencies?thanxSetup-&#039;05 S15L7 solo baric w/ a modified 6.6cu.ft ported box-Lanzar HTG264 2 channel 2x600 Watt Mosfet Amp 2400W max-Pioneer DEH-P4850MPH head unit-2.4 Farads Lanzar Capacitor-Lanzar vibe x8 crossover-Clarion mids..that&#039;s all..i still have my 15&quot; kicker es,can i use it as a midsub?//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif</blockquote>

[QUOTE="renier, post: 1762723, member: 568053"] Re: stiil the new L7s15 and the lanzar amp -------------------------------------------------------------------------------- hei!i've put the wirings of the sub parallel..it's loud as hell,but it's still bridge on the ampli..the ampli says that it's only brigdeable at 4ohm..my sub is a dual 4,so when i use series wires,i get 8ohms..and it sucks..at 2ohms, the body of my Suv shake and make a lot of noises caused by frictioning of something,i don't know.. i'm just waiting the ampli to protect,or 2 get faulty.. my ported box(used w/ a keicker es previously)can hold it..the mdf in front vibrate and make noises..so i can't enjoy the break in.. i don't know if i'm smelling the sub burning or the ampli or the mdf.. this morning, i've took a look and tried it again.. w/ the engine on.. my 2.4 farads lanzar capacitor at first was good..the current was always bet. 10.2 and 12.5..suddenly,it dropped at 8..7..6.. and it turned off by itself,turning off my whole system..what that means? i looked at my alty,and it's only 45~?or 65~.. this is my dad's vehicle,that's why i can't make modifications by myself w/o telling him.. but the system is mine,i brought it.. can you help me again by tell me bout HTZ,how to calculate it and how to tune a box to the deepest frequencies?thanx Setup-'05 S15L7 solo baric w/ a modified 6.6cu.ft ported box -Lanzar HTG264 2 channel 2x600 Watt Mosfet Amp 2400W max -Pioneer DEH-P4850MPH head unit -2.4 Farads Lanzar Capacitor -Lanzar vibe x8 crossover -Clarion mids.. that's all..i still have my 15" kicker es,can i use it as a midsub?[IMG]//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif[/IMG] [/QUOTE]

Verification