Reply to thread

Message

<blockquote data-quote="Worlddre" data-source="post: 5989953" data-attributes="member: 556661">its not the kit its the car. The factory radio in that car is 1/2&quot; shallower then a din radio and so is the mounting area. If you look at the back of the factory radio you will see a little black thing sticking out. Now look in the empty dash you will see a 1&quot; thick plastic thing with a hole in it for that black thing. That plastic piece must be removed for the radio to fully slide into the dash.Simply pop the acc controls out..you can use your hand for that by pushing from the back with the radio out. Then pop the top ac vents out. These are tougher but are removed by taking out the two phillips screws on either under side and then using the same method as the hvac controls. Once all that is out take out those two bottom corner screws that the hvac controls covered up. No that big piece of plastic will come right out of the dash. Cut and file that back piece off and pop the thing back in and your radio will then fit fine.</blockquote>

[QUOTE="Worlddre, post: 5989953, member: 556661"] its not the kit its the car. The factory radio in that car is 1/2" shallower then a din radio and so is the mounting area. If you look at the back of the factory radio you will see a little black thing sticking out. Now look in the empty dash you will see a 1" thick plastic thing with a hole in it for that black thing. That plastic piece must be removed for the radio to fully slide into the dash. Simply pop the acc controls out..you can use your hand for that by pushing from the back with the radio out. Then pop the top ac vents out. These are tougher but are removed by taking out the two phillips screws on either under side and then using the same method as the hvac controls. Once all that is out take out those two bottom corner screws that the hvac controls covered up. No that big piece of plastic will come right out of the dash. Cut and file that back piece off and pop the thing back in and your radio will then fit fine. [/QUOTE]

Verification