Reply to thread

Message: <blockquote data-quote="gatorgrizz27" data-source="post: 1683672" data-attributes="member: 565956"><p>I have a Kenwood Excelon X-689 head unit, running my front door speakers and subwoofer off a 4 channel amp, using the front and sub pre-outs.  When playing music with a lot of bass, if the bass control on the h/u is turned up all the way and the volume is turned up past about 30/35, it will cut out and stop playing for a second, then continue.  It does not turn off, it just freezes for a second or two, and if you turn the volume or subwoofer level down, it doesn't cut out.  My gains on the amp were set with a DMM, and the amp is fed by 1/0 wire, my alt is fine, etc... Do I need to run a larger power wire to the h/u?  This is the only thing I can think of that might cause this to happen.  Thanks in advance for any help.</p></blockquote><p></p>

Top