Reply to thread

Message

<blockquote data-quote="LuvnThatBass" data-source="post: 4096758" data-attributes="member: 561396"><p>so i just installed my deck.&nbsp; but nothing from the door speakers (output on head unit is ok).&nbsp; so i think i am going to have to take it to that near by audio shop and pay them to do an amp bypass (becuz of the external factory infinity amp..)&nbsp; so im pretty much pissed about that.&nbsp; but i have a few questions concerning something else.&nbsp; i just got a multimeter from millionbuy.com&nbsp; and when i hook it up to my BATT + and GRN - on my amp it reads 13.8v.&nbsp; but when i take out my neg speaker terminal and use the multimeter to set the gain i cant get a consistant number,&nbsp; it keeps fluctuating from like 00.3-1.00v&nbsp; so i dont really know what this means.&nbsp;&nbsp; i was playing a 40hz song and turned my head unit up to about 3/4 full.&nbsp; and my bass was at 0&nbsp; subwoofer level was at 6 (highest)&nbsp; remote gain was at full, and gain on amp was a little more than 1/2 up.&nbsp; i had the DMM set to test the range of 200v.&nbsp; that gave me the 00.0 reading when not connected.&nbsp; whats the deal here??&nbsp; ugh!&nbsp; too many controls on this pioneer....</p></blockquote><p></p>

[QUOTE="LuvnThatBass, post: 4096758, member: 561396"] so i just installed my deck. but nothing from the door speakers (output on head unit is ok). so i think i am going to have to take it to that near by audio shop and pay them to do an amp bypass (becuz of the external factory infinity amp..) so im pretty much pissed about that. but i have a few questions concerning something else. i just got a multimeter from millionbuy.com and when i hook it up to my BATT + and GRN - on my amp it reads 13.8v. but when i take out my neg speaker terminal and use the multimeter to set the gain i cant get a consistant number, it keeps fluctuating from like 00.3-1.00v so i dont really know what this means. i was playing a 40hz song and turned my head unit up to about 3/4 full. and my bass was at 0 subwoofer level was at 6 (highest) remote gain was at full, and gain on amp was a little more than 1/2 up. i had the DMM set to test the range of 200v. that gave me the 00.0 reading when not connected. whats the deal here?? ugh! too many controls on this pioneer.... [/QUOTE]

Verification