Reply to thread

Message

<blockquote data-quote="cha0" data-source="post: 2783560" data-attributes="member: 571056">well im too new to CA to have a good enough in depth know how to make the box for this. my last project to really get my feet wet with CA was with a W6 and i used subwoofer tools to get my box plans so this will be my first shot at a cheap SPL setup.im trying to see if i have enough room for a 15 inch AQ. the specs of my trunk are i have a depth of 32 inches, a width of 44 inches and a height of 12 inches. for the height i only have a foot since the back speakers stick down. so if i utalize all 12 inches ill still have free air space with all the room inbetween the mids that stick down into the truck.now that being sad, is there a problem with having the driver on top of the box and the port on the side (where the driver normally is)? i cant have the driver on the side since my height can only be 12 inches with the thinckness of the wood. since i have a depth of almost 3 feet it would be sick if i could mount the driver on top.any help with box plans would be nice. all i know is AQ reccamends 4.5 cubes and i want this tuned to 40Hz. thanks in advance.</blockquote>

[QUOTE="cha0, post: 2783560, member: 571056"] well im too new to CA to have a good enough in depth know how to make the box for this. my last project to really get my feet wet with CA was with a W6 and i used subwoofer tools to get my box plans so this will be my first shot at a cheap SPL setup. im trying to see if i have enough room for a 15 inch AQ. the specs of my trunk are i have a depth of 32 inches, a width of 44 inches and a height of 12 inches. for the height i only have a foot since the back speakers stick down. so if i utalize all 12 inches ill still have free air space with all the room inbetween the mids that stick down into the truck. now that being sad, is there a problem with having the driver on top of the box and the port on the side (where the driver normally is)? i cant have the driver on the side since my height can only be 12 inches with the thinckness of the wood. since i have a depth of almost 3 feet it would be sick if i could mount the driver on top. any help with box plans would be nice. all i know is AQ reccamends 4.5 cubes and i want this tuned to 40Hz. thanks in advance. [/QUOTE]

Verification