Reply to thread

Message: <blockquote data-quote="boomzilla" data-source="post: 5608009" data-attributes="member: 587708">Ok. I made them when I installed them because I had a factory 4x6 opening. They are sealed off with non hardening model clay.Like I said, I have no idea how to tune all of these together, on the hu and the amp. Subs arent a problem because it's basically 70hz and down, with highs, you have to seperate the highs, mids, and lower mids, which I don't know about at all.And the amp's left channel is giving off alot less power, so I bridged the amps two channels to one mid, one tweeter connected to my crossovers, and it solved it for the most part. I can't wire the speakers down to 2 ohms because the amp is only 4 ohm stable in bridged mode. So I wired them to 8 ohms.</blockquote>

Top