Reply to thread

Message

<blockquote data-quote="qxfosgatesvt" data-source="post: 54007" data-attributes="member: 544134">ok i have 3 amps 1 kenwood 4ch for my highs/mids&nbsp; and 2 class d 1000wt interfire amps for my power hx2s,my head unit is a pioneer premier 6400, i have a sub output and a normal out put,i got all of my grounds connected good down to bare metal, i dont have any power/ground wires near any of the rcas, BUT when i connect the sub out put from the head unit to the main amp that amp will slam the hell out my sub! but when i go and add the 2nd rcas from the 1st sub amp to go to the other sub amp the 2 sub amp dosent make the 2nd sub slam as hard as the 1st one there hitting at differant speeds,and when i turn on the tunner to listen to the radio stations i get road noise but when i put a cd in it goes away and then i take it out and put the tunner back on again and the noise is still there,plus i was wondering&nbsp; if any has suggestions on a box for my power hx2s there 12in,the box there in now sux i think its 2.5per chamber port it about 13in long and 4in wide,any help would be great !!!!</blockquote>

[QUOTE="qxfosgatesvt, post: 54007, member: 544134"] ok i have 3 amps 1 kenwood 4ch for my highs/mids and 2 class d 1000wt interfire amps for my power hx2s, my head unit is a pioneer premier 6400, i have a sub output and a normal out put, i got all of my grounds connected good down to bare metal, i dont have any power/ground wires near any of the rcas, BUT when i connect the sub out put from the head unit to the main amp that amp will slam the hell out my sub! but when i go and add the 2nd rcas from the 1st sub amp to go to the other sub amp the 2 sub amp dosent make the 2nd sub slam as hard as the 1st one there hitting at differant speeds, and when i turn on the tunner to listen to the radio stations i get road noise but when i put a cd in it goes away and then i take it out and put the tunner back on again and the noise is still there, plus i was wondering if any has suggestions on a box for my power hx2s there 12in, the box there in now sux i think its 2.5per chamber port it about 13in long and 4in wide, any help would be great !!!! [/QUOTE]

Verification