Reply to thread

Message: <blockquote data-quote="bumpweLL.nYc" data-source="post: 3350356" data-attributes="member: 570798"><p>Would you get good results with a box the width of the hatch and that follows the back seat angle, separate the box into 2 chambers with a 1.5 inch wall widthwise (its an easy piece to add considering youre working with all 90* there).. So I was thinking 2 10's sealed in the chamber directly behind the back seat, facing in, and a 15 in the hatch. Porting the 15 is a possibility and sealed is easy. HeH?</p></blockquote><p></p>

Top