Reply to thread

Message

<blockquote data-quote="DJ Jester" data-source="post: 725076" data-attributes="member: 559329">I plan on using 3/4 for most of the enclosure and 1&quot; for the parts that need to be more stable.The reason for the platform, its not actually a platform, its really part of the box, is going to be to add interior space. Without it, the box would only be about 0.8 or so.Anyway, i&#039;ve attached an attempt to draw the way it will look from the side.There. I hope that explains it a little bit better.I&#039;ll try to take and post some pics after it&#039;s built.Oh, and its going in a Jeep Grand Cherokee. I read somewhere on this board that you get a somewhat heightened response in SUV&#039;s with the sub pointing upward.Actually, they will be at more of an angle than they are in that little drawing above.Anyhow, please respond with any more info that any of you hvae. Thanks much for the help.Jester</blockquote>

[QUOTE="DJ Jester, post: 725076, member: 559329"] I plan on using 3/4 for most of the enclosure and 1" for the parts that need to be more stable. The reason for the platform, its not actually a platform, its really part of the box, is going to be to add interior space. Without it, the box would only be about 0.8 or so. Anyway, i've attached an attempt to draw the way it will look from the side. There. I hope that explains it a little bit better. I'll try to take and post some pics after it's built. Oh, and its going in a Jeep Grand Cherokee. I read somewhere on this board that you get a somewhat heightened response in SUV's with the sub pointing upward. Actually, they will be at more of an angle than they are in that little drawing above. Anyhow, please respond with any more info that any of you hvae. Thanks much for the help. Jester [/QUOTE]

Verification