Reply to thread

Message: <blockquote data-quote="h2h0e" data-source="post: 8068947" data-attributes="member: 653463">Ok so i have a big question for you ( or others as well ) My amp spec is apsm-2000 : 900W @ 4 Ohm ( i know its not doing is rated power so lets say -25% )1400W @ 2 Ohm2000W @ 1 OhmIf my amp is clipping at 50% gain at 4 ohm , i want to know if its will be the same thing at 1 ohm , i mean what happen if i set my amps to 1 ohms and i give only like 15 % witch will be the same Rms as 4 ohm (50%) will it clip at 15 % lol ? if not i could run my amp at 1 ohm so i will basicly have more power since its not clipping</blockquote>

Top