Reply to thread

Message

<blockquote data-quote="Zip_Loc" data-source="post: 5373688" data-attributes="member: 604751">How would this box work:50 inches long x 12 inches high x 7 inches deep (with a possible larger bottom depth, i.e. slanted face).Port is 10.5 inches tall x 3 inches wide x 16 inches longFor a pair of DD 1508, think its 1.9ish after all displacements.Now for some really dumb questions that I never thought about before this project:1. Would Gorilla Glue work well for the joints? I have alot of it lying around, and it does expand as it dries, kinda seemed like it would work well for this application.2. Ummm...how do you get the wires from the speaker to the amp? Port is passenger side, subs and amp driver side so I dont want to run really long wires, and dont want to use those plastic terminal things. Any other options?3. Is it okay to have the subs all the way to the right of the box with the port on the left side? Most boxes ya&#039;ll build seem to have the port wall like right behind the subs.</blockquote>

[QUOTE="Zip_Loc, post: 5373688, member: 604751"] How would this box work: 50 inches long x 12 inches high x 7 inches deep (with a possible larger bottom depth, i.e. slanted face). Port is 10.5 inches tall x 3 inches wide x 16 inches long For a pair of DD 1508, think its 1.9ish after all displacements. Now for some really dumb questions that I never thought about before this project: 1. Would Gorilla Glue work well for the joints? I have alot of it lying around, and it does expand as it dries, kinda seemed like it would work well for this application. 2. Ummm...how do you get the wires from the speaker to the amp? Port is passenger side, subs and amp driver side so I dont want to run really long wires, and dont want to use those plastic terminal things. Any other options? 3. Is it okay to have the subs all the way to the right of the box with the port on the left side? Most boxes ya'll build seem to have the port wall like right behind the subs. [/QUOTE]

Verification