Reply to thread

Message

<blockquote data-quote="Zxcvtypo" data-source="post: 2517490" data-attributes="member: 557597">Hey guys,&nbsp; I&#039;m trying to do my first 3-way setup, and decided to go DIY with these dayton&#039;s as it seems many others have done..With some of the things I&#039;ll be selling soon I should be left over with $1000 or so give or take a little.&nbsp; The setup will be in my Jeep Cherokee for now...I was thinking of these as a starting point -- I noticed the tweets and mids were out of stock till like mid Feb but that&#039;s fine I&#039;m just starting to figure things out.<a href="http://www.partsexpress.com/pe/pshowdetl.cfm?&amp;amp;Partnumber=295-376" target="_blank">http://www.partsexpress.com/pe/pshowdetl.cfm?&amp;amp;Partnumber=295-376</a> -- Mid&#039;s<a href="http://www.partsexpress.com/pe/pshowdetl.cfm?&amp;amp;Partnumber=285-020" target="_blank">http://www.partsexpress.com/pe/pshowdetl.cfm?&amp;amp;Partnumber=285-020</a> -- Midrange<a href="http://www.partsexpress.com/pe/pshowdetl.cfm?&amp;amp;Partnumber=275-130" target="_blank">http://www.partsexpress.com/pe/pshowdetl.cfm?&amp;amp;Partnumber=275-130</a> -- TweetersI just have a couple questions about this...1.&nbsp; If properly setup (I&#039;m planning on putting the midbasses in my stock location in the doors, mids higher in the door and tweets in the a-pillar, thoughts?)&nbsp; will I be impressed by these?2.&nbsp; Is there a big difference between the 7 and 8&quot; mids?3.&nbsp; Should I hook the tweets to the front channel, mids to the rear, and midbasses/subs to the sub channel using splitters..then use the 3-way xover on the head unit for the speakers and lpf on the amp for the sub?I have 3 amps right now, the 1200.1 for my mag, 200.2 for my HD-62&#039;s, and a 4150XXK that is unused //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif&nbsp; &nbsp; would the mids and tweets be alright running off the 4150, and midbassess off the 200.2 with the gains set very low?&nbsp; I figure if I can use the amps I have right now, the speakers would take up around $300, wires around $50 and that leaves me $650 for a new head unit, I&#039;m lookin at an 880prs or cd7000, both of which would keep me under my budget.Any feedback at all would be appreciatededit -- sell 200.2 and pick up a 2100xxk for the mids to match the 4150?&nbsp; that&#039;d&nbsp; be *** when i switch over to my rsx.</blockquote>

[QUOTE="Zxcvtypo, post: 2517490, member: 557597"] Hey guys, I'm trying to do my first 3-way setup, and decided to go DIY with these dayton's as it seems many others have done..With some of the things I'll be selling soon I should be left over with $1000 or so give or take a little. The setup will be in my Jeep Cherokee for now...I was thinking of these as a starting point -- I noticed the tweets and mids were out of stock till like mid Feb but that's fine I'm just starting to figure things out. [URL="http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=295-376"]http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=295-376[/URL] -- Mid's [URL="http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=285-020"]http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=285-020[/URL] -- Midrange [URL="http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=275-130"]http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=275-130[/URL] -- Tweeters I just have a couple questions about this... 1. If properly setup (I'm planning on putting the midbasses in my stock location in the doors, mids higher in the door and tweets in the a-pillar, thoughts?) will I be impressed by these? 2. Is there a big difference between the 7 and 8" mids? 3. Should I hook the tweets to the front channel, mids to the rear, and midbasses/subs to the sub channel using splitters..then use the 3-way xover on the head unit for the speakers and lpf on the amp for the sub? I have 3 amps right now, the 1200.1 for my mag, 200.2 for my HD-62's, and a 4150XXK that is unused [IMG]//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif[/IMG] would the mids and tweets be alright running off the 4150, and midbassess off the 200.2 with the gains set very low? I figure if I can use the amps I have right now, the speakers would take up around $300, wires around $50 and that leaves me $650 for a new head unit, I'm lookin at an 880prs or cd7000, both of which would keep me under my budget. Any feedback at all would be appreciated edit -- sell 200.2 and pick up a 2100xxk for the mids to match the 4150? that'd be *** when i switch over to my rsx. [/QUOTE]

Verification