Reply to thread

Message: <blockquote data-quote="bumpasauras" data-source="post: 8256486" data-attributes="member: 607820">Ok so it is 4 channel than test you could get an audio controll 3-4 way xover and go active or run passives on each half.. Just borrow a dd1 and a cc1 and go active you won't regret it .One idea would be to pick up a ppi 900.4 (fully active capable) and run active right from the amp x over.  In my wife's care I have a 900.4 running 2 sundown comp sets (4 tweets 4 6.5's) active off the amps xover and I have not cooked a tweet yet. And with the ppi 900.4 putting 224 watts a channel out at 2 ohm each tweet/speaker is seeing 110 rms..plenty of powa..So either you buy a xover (100$ aprox) or get you a ppi 900.4 175.00 and solve your xover issue and add more power and prolly less current draw since that 900.4 is so efficient ..</blockquote>

Top