Reply to thread

Message

<blockquote data-quote="phyphoestilic" data-source="post: 2622728" data-attributes="member: 569258">I need some suggestions on some good equpiment to use. I&#039;m gonna be doing my original plan and cutting my entire back dash and making a IB setup. Now the first part is I dont know if it would be a better idea to get a jig saw or air saw for this job. Please recommened me some saws for cutting through metal. Trying to stay below $150 area.Was looking at this <a href="http://www.homedepot.com/prel80/HDUS/EN_US/diy_main/pg_diy.jsp?CNTTYPE=PROD_META&amp;amp;CNTKEY=misc%2fsearchResults.jsp&amp;amp;BV_SessionID=@@@@0229170226.1170380635@@@@&amp;amp;BV_EngineID=cccfaddkdgffeldcgelceffdfgidgmk.0&amp;amp;MID=9876" target="_blank">http://www.homedepot.com/prel80/HDUS/EN_US/diy_main/pg_diy.jsp?CNTTYPE=PROD_META&amp;amp;CNTKEY=misc%2fsearchResults.jsp&amp;amp;BV_SessionID=@@@@0229170226.1170380635@@@@&amp;amp;BV_EngineID=cccfaddkdgffeldcgelceffdfgidgmk.0&amp;amp;MID=9876</a>possibly the big brother (6.4amp version) but I am hoping this would be okay.Any suggestions please. Remeber main thing is it has to cut through about 1/8&quot; of metal.Also a good blade suggestion would be nice too.</blockquote>

[QUOTE="phyphoestilic, post: 2622728, member: 569258"] I need some suggestions on some good equpiment to use. I'm gonna be doing my original plan and cutting my entire back dash and making a IB setup. Now the first part is I dont know if it would be a better idea to get a jig saw or air saw for this job. Please recommened me some saws for cutting through metal. Trying to stay below $150 area. Was looking at this [URL="http://www.homedepot.com/prel80/HDUS/EN_US/diy_main/pg_diy.jsp?CNTTYPE=PROD_META&CNTKEY=misc%2fsearchResults.jsp&BV_SessionID=@@@@0229170226.1170380635@@@@&BV_EngineID=cccfaddkdgffeldcgelceffdfgidgmk.0&MID=9876"]http://www.homedepot.com/prel80/HDUS/EN_US/diy_main/pg_diy.jsp?CNTTYPE=PROD_META&CNTKEY=misc%2fsearchResults.jsp&BV_SessionID=@@@@0229170226.1170380635@@@@&BV_EngineID=cccfaddkdgffeldcgelceffdfgidgmk.0&MID=9876[/URL] possibly the big brother (6.4amp version) but I am hoping this would be okay. Any suggestions please. Remeber main thing is it has to cut through about 1/8" of metal. Also a good blade suggestion would be nice too. [/QUOTE]

Verification